Blog

Unlike other ordinary light sources, laser cutting lasers can achieve energy concentration due to their monochromaticity, coherence, collimation and high energy density, thus causing damage to human organs (especially human eyes). .Mar 13, 2019

The United States Defence Department has developed a prototype of an aircraft armed with a laser gun that could destroy tanks 10 miles away. The weapon is capable of destroying targets up to 15km (10m) away, according to Defense Update online magazine.Mar 28, 2008

So, having more laser power means you can cut a larger range of material and a larger range of thickness for each material. A 1kW fiber laser can cut stainless steel up to 5mm. But a 3kW can cut the same stainless steel up to 12mm.Mar 25, 2021

Industrial lasers absolutely can cut and engrave metal. ... Most lasers capable of cutting through even steel plates are high power capacity CO2 lasers. Metals such as stainless steel and aluminum can be cut with a laser when compressed gas technology is used.

• Fiber lasers are widely used in many applications such as drilling, welding, cutting and marking and in many industries such as automotive, medical, electronics and manufacturing.

• Fiber laser marking machines are engineered for high speed beverage, pharmaceutical and extrusion manufacturers who need to code data such as expiry information, lot and batch numbers, and other critical production information.

• Engraving with a Pulsed Fiber Laser. Engraving is the most common of all Laser marking applications, the engraving process is produced by the Laser beam removing material to create a mark, where the Laser acts like a chisel and blows away selected areas of the subject material.This... read more >.

Ultrafast lasers can be used for high quality micromachining of brittle materials like glass and are often used for scribing and cutting with flexible geometries and high quality edges.Apr 30, 2021

From Wikipedia, the free encyclopedia. A fiber laser (or fibre laser in British English) is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, neodymium, dysprosium, praseodymium, thulium and holmium.

Fiber laser cutting benefits include improved speed, eliminated tooling charges, reduced set-up and down times, reduced power usage and costs, much less material waste, and all through a non-contact process (which is safer and avoids contamination).

Fiber lasers are everywhere in the modern world. Due to the different wavelengths they can generate, they are widely used in industrial environments to perform cutting, marking, welding, cleaning, texturing, drilling and a lot more.Nov 26, 2020

Ultrafast lasers are generally defined as lasers that produce pulses in the range of 5 fs to 100 ps (1 femtosecond = 10⁻¹⁵ seconds). If a laser is able to oscillate in many longitudinal modes, such short pulses can be produced with the so-called mode-locking technique.

A femtosecond laser is a laser which emits optical pulses with a duration well below 1 ps (→ ultrashort pulses), i.e., in the domain of femtoseconds (1 fs = 10⁻¹⁵ s). It thus also belongs to the category of ultrafast lasers or ultrashort pulse lasers (which also include picosecond lasers).

In fact, the diode module in a fiber laser typically last three times longer than other technologies. Most lasers have a life of around 30,000 hours, which typically equates to about 15 years' use. Fiber lasers have an expected life of around 100,000 hours, which means about 45 years' use.Aug 10, 2017

Expensive, hand-blow glass or crystal glasses may have stresses in the material that are aggravated by the laser beam heat while engraving, which can result in fractures in the material. You can also laser process mirror glass using a fiber laser system by removing only the reflective layer on the back.

The main difference that determines the type of materials each laser can process is the wavelength. A fiber laser usually has a wavelength of 1,060 nm while CO2 lasers have wavelengths in the 10,600 nm range. In general, fiber lasers have many advantages over CO2 lasers.Apr 10, 2019

Typically, O (oxygen), N (nitrogen) and air will use as an auxiliary gas for fiber laser cutting. Their functions are as follows. N: Nitrogen is used to cut non-ferrous metals such as stainless steel and aluminum. It cools and protects the material.Aug 31, 2018

While fiber laser is excellent at cutting most materials, because of the shorter wavelength it cannot cut acrylic or polycarbonate and can only cut wood or fabric in limited applications.

Using a fiber laser on wood is essentially like starting a campfire. The 1064nm wavelength of a fiber laser transmits partially through organic structures (like wood) based on its shorter wavelength. However, when the beam travels into wood, its absorption can't be controlled.Feb 3, 2021

Laser power will likely decrease over time because laser optics and mirrors gradually absorb more laser light.

• A fiber laser or fibre laser is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium , ytterbium , neodymium , dysprosium , praseodymium, thulium and holmium.